HomeBlogScreeching Amana Clothes Dryer Repair in Poway: Drum Roller Kit and Belt Replacement
Back to Blog
Case StudyOct 30, 2026•5 min read•66 views

Screeching Amana Clothes Dryer Repair in Poway: Drum Roller Kit and Belt Replacement

DR
David RamirezMaster Dishwasher & Built-In System Tech
Verified San Diego Master Tech
Screeching Amana Clothes Dryer Repair in Poway: Drum Roller Kit and Belt Replacement

Got called out to Poway for an Amana dryer that was making a terrible screeching noise. The customer said every time they tried to dry a load of towels, the squeal was loud enough to hear out on the street. I came by their house off Espola Road with my van to check it out.

What We Heard During the First Test Run

I walked into the laundry room and turned the dryer on for just a couple seconds. Right away you could hear that awful metal-on-rubber squeal. The customer shook their head and told me: "We honestly thought the drum was about to tear straight through the cabinet—the noise was unbearable." When a dryer makes that high-pitched racket, nine times out of ten it is either a drum roller or an idler pulley going bad. The drum sits right on those wheels, and when they stop spinning, things get loud fast.

Disassembling Amana dryer top cover and front bulkhead to inspect drum
Disassembling Amana dryer top cover and front bulkhead to inspect drum

Pulling the Cabinet Apart

I unplugged the 240V plug and pulled the vent hose off the back so I could move the unit around. Popped the top lid open and took the front panel off to get down to the drum. Once I got the drum out of the cabinet, the problem was staring right at me.

Dryer cabinet interior with drum and front bulkhead removed
Dryer cabinet interior with drum and front bulkhead removed

Why the Drum Roller Seized Up

Once the drum was out, I checked the four wheels it rides on. Three turned fine, but the back left one was totally seized. I tried turning it with my pliers and it wouldn't move. You could see where the drum had been dragging over it because half the rubber was shaved flat. That flat spot was slapping the drum every time it rotated, which was causing all that screaming noise.

Warning
If your dryer starts making a loud screeching noise, do not keep running it. When a roller locks up, the motor has to pull twice as hard to turn the drum. That extra strain will overheat the drive motor and can burn out the start windings.

Installing the New Heavy-Duty Roller Kit

I told the customer we should do the whole roller kit instead of just swapping one wheel. If one roller goes out after years of heat, the others are right behind it. I cleaned off the metal shafts with some degreaser and emery cloth to get all the gunk off. Then I put on four brand new OEM rollers with fresh fiber washers and retaining clips. Since the old drive belt was stretched out and had tiny cracks on the ribs from fighting that stuck roller, I put a new belt on as well. I also grabbed my shop vac and cleaned out all the lint packed around the blower wheel and bottom panel so it wouldn't be a fire risk.

New OEM Amana drum support roller kit belt and hardware laid out
New OEM Amana drum support roller kit belt and hardware laid out
Pro Tip
Never spray WD-40 or regular oil onto dryer roller axles. Liquid oil attracts loose lint like a magnet, creating a sticky paste that cooks under dryer heat and ruins the bronze bushings within a few months.
Installing and inspecting new rollers on the front drum support bulkhead
Installing and inspecting new rollers on the front drum support bulkhead

Final Testing and Results

Put the drum back in, hooked the belt up around the motor and idler, and put the front panel and top back together. Plugged it in and ran it for fifteen minutes on high heat. The dryer ran totally quiet. No squeaking, no thumping, just smooth rotation and good heat. The homeowner was super happy they did not have to drop a thousand dollars on a new dryer just for worn-out rollers.

If your clothes dryer is making a loud squealing or grinding noise anywhere around Poway or San Diego County, schedule our professional dryer repair service or give us a call directly at (619) 332-2028.

Transparent Invoice Breakdown

  • Technician Diagnostic & Mechanical Inspection: $99.95 (100% waived upon approving repair — $0)
  • OEM Amana Drum Support Roller Kit (4 Rollers, Washers & Tri-Rings): $145.00
  • Heavy-Duty Multi-Groove Dryer Drive Belt: $48.00
  • Mechanical Labor (Bulkhead Disassembly, Axle Restoration, Belt Setup & Lint Cleanout): $210.00
  • Total Repair Investment: $403.00
Related Service Areas & Specialized Repairs:
Same-Day San Diego Service

Need Technician Assistance Today?

$99.95 Technician Diagnostic Visit • 100% Waived With Completed Repair.

Call (619) 332-2028
Google Customer Reviews

Real Google Reviews From Satisfied Clients

Verified customer ratings from homeowners and businesses across San Diego County & Coachella Valley.

4.7

Google Rating (28 Verified Reviews)

WK

W K

a month ago

“Henry has been great....couldn't have been more knowledgeable and did a great job.....hope if I need help again he is available”

Coronado / San Diego, CA
Appliance Diagnostic & Repair
BL

Brent Lagace

a week ago

“Great service! Excellent staff! Thank you!”

San Diego / Coronado, CA
Appliance Diagnostic & Repair
CR

Chris Rea

a month ago

“Henry arrived and quickly got the dryer opened up and vacuumed, checked all sensors and greased rollers. Very fast, very thorough! Great job!”

San Diego / Coronado, CA
Dryer Repair & Service
Reviews automatically synchronized via official Google Places API
Have you used our service? Leave a review on Google →
Call Now