Ice Maker Repair Master Technician San Diego
HomeServicesIce Maker Repair
San Diego Master Repair • CA Lic. #A51622

Same-Day Ice Maker & Clear Ice Machine Repair in San Diego, CA

Specialists for Sub-Zero, Scotsman, Manitowoc, Hoshizaki & built-in refrigerator ice makers. $99.95 diagnostic fee 100% waived with repair.

90-Day Parts & Labor Warranty
2–4 Hour Arrival Window
EPA 608 Universal Certified

Licensed Master Ice Maker Repair Specialists in San Diego

An under-counter clear ice maker or built-in refrigerator ice machine that stops producing ice disrupts entertaining and daily convenience. At ETS Appliance Repair San Diego, we service under-counter clear ice makers and refrigerator modules from Sub-Zero, Scotsman, Manitowoc, Hoshizaki, KitchenAid, and Marvel. We replace water fill solenoid valves, mold thermostats, ejector blades, harvest drive motors, and water circulation pumps.

Licensed master technician performing Ice Maker Repair diagnostic test in San Diego
Henry Miller & Arthur Davis — On-Site DiagnosticsCA Lic. #A51622

Common Symptoms We Diagnose & Fix

Ice maker stopped producing ice or dropping small hollow cubes
Water leaking into ice bin forming a solid slab of ice
Ice maker motor running continuously without ejecting cubes
Clear ice machine producing cloudy or thin ice sheets

Technician Field Specifications & Testing Benchmarks

Diagnostic ParameterFactory Standard Calibration
Water Fill Solenoid Flow Rate0.22 to 0.40 GPM
Mold Thermostat Harvest Temp15°F (-9.5°C) Cut-In Spec
Ejector Motor Winding85 to 110 Ohms Resistance
Water Fill Time Calibration6.0 to 8.0 Seconds Per Harvest Cycle

Harvest Drive Motor & Mold Inspection

Multimeter testing on the mold thermostat and ejector motor ensures reliable 8-minute harvest cycles.

Component maintenance and diagnostic service for Ice Maker Repair in San Diego, CA

OEM Error Code Breakdown Matrix

Sub-ZeroCode: EC 20

Ice Maker Harvest Timeout / Motor Locked

Master Tech Solution: Inspect mold heater, check water valve flow rate, replace ice module.

ScotsmanCode: E02

Harvest Freeze Override / Water Sensor Fault

Master Tech Solution: Clean water sensor probe and descale evaporator grid.

ManitowocCode: E06

Water Level Probe Circuit Error

Master Tech Solution: Clean water level probe and replace inlet valve.

Transparent San Diego Repair Cost Guide

Service DescriptionPrice EstimateWarranty & Terms
Technician Diagnostic Visit & Inspection$99.95100% FREE ($0) when repair is completed
Water Fill Valve & Filter Housing Assembly$135 – $210Includes water pressure check
Ice Mold Thermostat & Ejector Motor Kit$150 – $235OEM Parts • 90-Day Warranty
Clear Ice Evaporator Grid & Pump Assembly$220 – $380Restores crystal clear 50 lb/day production

San Diego Neighborhood Coverage

Our mobile repair units provide same-day dispatch to: La Jolla (92037), Del Mar (92014), Carlsbad (92008, 92009, 92011), Oceanside, Pacific Beach (92109), Downtown San Diego (92101), Coronado (92118), Poway (92064), Chula Vista, and El Cajon.

Need service in Coachella Valley / Palm Springs?View Palm Springs Ice Maker Repair →

Ice Maker Repair Frequently Asked Questions

Why is my ice maker dropping tiny, hollow ice cubes?

Tiny or hollow cubes indicate restricted water flow into the mold assembly, caused by a clogged dual water filter or a failing water inlet solenoid valve. Replacing the valve and filter restores full cube sizing.

SAN DIEGO EMERGENCY DISPATCH

Schedule Ice Maker Repair

San Diego Master Technician Service

$99.95 Diagnostic Visit100% FREE ($0) when repair is completed.
Call (619) 332-2028 Now
90-Day Parts & Labor Warranty
Same-Day 2–4 Hour Arrival
CA BHGS License #A51622
Verified Field Work & Cases

Our Recent Works & Case Studies in Ice Maker Repair

Real field diagnostics, OEM component replacements, and master technician case notes for Ice Maker Repair.

View All Articles & Cases
GE Monogram built-in refrigerator with manifold gauges hooked up in La Quinta
Case Study
Nov 17, 2026
5 min read•52

GE Monogram Refrigerator Stuck at 50°F in La Quinta: Sealed System Freon Leak Repair and Filter-Drier Replacement

A 42-inch built-in GE Monogram refrigerator in La Quinta was stuck at 50°F from a pinhole Freon leak on the filter-drier. We silver-brazed a new OEM drier, pulled a 450-micron deep vacuum, and recharged 5.5 oz of R-134a to restore 37°F cooling.

By Henry MillerRead Case
KitchenAid built-in side-by-side refrigerator in Rancho Mirage luxury kitchen
Case Study
Nov 11, 2026
5 min read•69

Warm KitchenAid Refrigerator Stuck at 70°F in Rancho Mirage: Main Control Board Replacement

A 15-year-old KitchenAid refrigerator in Rancho Mirage sat warm at 70°F with clicking relays and a wedged air damper. We diagnosed dried-out power supply capacitors and replaced the main control board, restoring rock-solid 37°F food preservation

By Henry MillerRead Case
Technician replacing OEM main control board on built-in KitchenAid refrigerator stuck at 56 degrees in La Mesa
Case Study
Nov 5, 2026
5 min read•55

Warm KitchenAid Refrigerator Stuck at 56°F in La Mesa: Main Control Board Replacement

A 42-inch built-in KitchenAid side-by-side refrigerator in La Mesa stuck at 56°F was diagnosed with bulging power supply capacitors and a closed air damper. We replaced the OEM main control board to restore proper 37°F cooling for $1,240

By Mark ReynoldsRead Case
Technician holding new OEM evaporator fan motor during GE refrigerator repair in Encinitas
Case Study
Oct 27, 2026
5 min read•38

GE French Door Refrigerator Warm at 67°F: Evaporator Fan Replacement & Steam Defrost in Encinitas

Encinitas service call: A GE French door refrigerator was sitting at 67°F in the fresh food section. We diagnosed a seized evaporator fan motor, steamed the frosted coils, and restored cooling for $465.

By Henry MillerRead Case
Google Customer Reviews

Real Google Reviews From Satisfied Clients

Verified customer ratings from homeowners and businesses across San Diego County & Coachella Valley.

4.7

Google Rating (28 Verified Reviews)

WK

W K

a month ago

“Henry has been great....couldn't have been more knowledgeable and did a great job.....hope if I need help again he is available”

Coronado / San Diego, CA
Appliance Diagnostic & Repair
BL

Brent Lagace

a week ago

“Great service! Excellent staff! Thank you!”

San Diego / Coronado, CA
Appliance Diagnostic & Repair
CR

Chris Rea

a month ago

“Henry arrived and quickly got the dryer opened up and vacuumed, checked all sensors and greased rollers. Very fast, very thorough! Great job!”

San Diego / Coronado, CA
Dryer Repair & Service
Reviews automatically synchronized via official Google Places API
Have you used our service? Leave a review on Google →
Call Now